OEM Best 321 Stainless Steel Sheet Manufacturer - Hard precision stainless steel strips – Xinjing

Xinjing is a professional stainless steel materials supplier for over 20 years. Our hard materials all are manufactured with precision equipments and the most experienced technicians, precision enough on leveling and dimensions.

Products Attributes

• Tolerance: Thickness (In China) ±0.005mm, Width ±0.1mm;
• Width: No more than 600mm;
• Surface finished: 1D, 2D, etc.
• High mechanical properties, and the low or elevated yield stress or strength can be specified.
• Higher requirements in terms of horizontal straightness and edge quality.
• Remelt form available for particularly high cleanliness requirements
• The most common grades are austenitic and ferritic, such as grade 301, 304, 430, etc.

Application

• Medical Devices: Scalpel etc.
• Circuit board: Mobile phones circuit board, computers circuit board, etc.
• Fasteners: Tower springs, circlips, gaskets, stainless steel shrapnel, etc.
• Home appliances: Razor blades, juicer blades, etc.

The selection of the type of stainless steel needs to consider the following points: Appearance requests, air corrosion and the cleaning ways to be adopted, and then take into account the requirements of cost, aesthetics standard, corrosion resistance, etc. Contact us for engineering advice, to know how your specifications can be met, and to see which stainless steel is the right metal for the job.

Additional Services

Coil slitting
Slitting stainless steel coils into smaller width strips

Capacity:
Material thickness: 0.03mm-3.0mm
Min/Max slit width: 10mm-1500mm
Slit width tolerance: ±0.2mm
With corrective leveling

Coil cutting to length
Cutting coils into sheets on request length

Capacity:
Material thickness: 0.03mm-3.0mm
Min/Max cut length: 10mm-1500mm
Cut length tolerance: ±2mm

Surface treatment
For the purpose of decoration usage

No.4, Hairline, Polishing treatment
Finished surface will be protect by PVC film

>>>Technical guidence
Typical stainless steel 304 coils surface finished and its application field