OEM Best 316 Stainelss Steel Sheet Factory - Type 430 stainless steel in coil form wholesales – Xinjing

Xinjing is a full line processor, stockholder and service center for various of cold rolled and hot rolled stainless steel coils, sheets and plates, for over 20years. Our type 430 cold rolled coils all are produced following the international standard, precision enough on flatness and dimensions. Our steel processing center offers services of decoiling, slitting, cutting, surface treating, PVC coating, and paper interleaving.

Products Attributes

• Type 430 is a ferritic stainless steel with corrosion resistance approaching that of 304/304L stainless steel.
• Grade 430 has good intergranular resistance to a wide variety of corrosive environments, including nitric acid and some organic acids. It attains its maximum corrosion resistance when in highly polished or buffed condition.
• Grade 430 stainless resists oxidation in intermittent service up to 870°C and to 815°C in continuous service.
• Easier to machine than the standard austenitic grades such as 304.
• 430 Stainless steel can be welded well by all types of welding processes (except gas welding)
• 430 grade does not work to harden rapidly and can be formed using mild stretch forming, bending, or drawing operations.
• Stainless 430 is used in a variety of interior and exterior cosmetic applications where corrosion resistance is more important than strength.
• 430 features better thermal conductivity than Aystenite with smaller thermal expansion coefficient.

Application

• Automotive trim and muffler system.
• Heavy oil burner parts.
• Liner of disher washer.
• Container building.
• Fastners, hinges, Bolts, nuts, screens and burners.
• Stove element supports, flue linings.
• Outdoor advertising column.
• Electronic product.

The selection of the type of stainless steel needs to consider the following points: Appearance requests, air corrosion and the cleaning ways to be adopted, and then take into account the requirements of cost, aesthetics standard, corrosion resistance, etc.

Additional Services

Coil slitting
Slitting stainless steel coils into smaller width strips

Capacity:
Material thickness: 0.03mm-3.0mm
Min/Max slit width: 10mm-1500mm
Slit width tolerance: ±0.2mm
With corrective leveling

Coil cutting to length
Cutting coils into sheets on request length

Capacity:
Material thickness: 0.03mm-3.0mm
Min/Max cut length: 10mm-1500mm
Cut length tolerance: ±2mm

Surface treatment
For the purpose of decoration usage

No.4, Hairline, Polishing treatment
Finished surface will be protect by PVC film

>>>Technical guidence