Standard size 316L stainless steel sheets plates

Short Description:

Brand name 316 06Cr17Ni12Mo2 SUS316 1.4401 STS316
316L 022Cr17Ni12Mo2 SUS316L 1.4404 STS316L

Product Detail

Product Tags

Xinjing is a full-line processor, stockholder and service center for various of cold rolled and hot rolled stainless steel coils, sheets and plates, for over 20 years.

Alloys often are added to steel to increase desired properties. Marine-grade stainless steel, called type 316, is resistant to certain types of corrosive environments. There is a variety of different types of 316 stainless steel. Some common types are the L, F, N, and H variants. Each is slightly different, and each is used for different purposes. The "L" designation means 316L steel has less carbon than 316.

Same as grade 316 stainless steel, 316L grade is also non-hardenable by heat treatment and can be readily formed and drawn (pulled or pushed through a die or smaller hole).

Products Attributes

  • Type 316L stainless steel in a molybdenum-bearing austenitic.
  • 316L is very similar to 316 in almost every way: Cost is very similar, and both are durable, corrosion-resistant, and a good choice for high-stress situations.
  • 316L is a better choice for a project that requires a lot of welding,  it is used when welding is required to ensure maximum corrosion resistance.
  • 316L is a great stainless steel for high-temperature, high-corrosion uses, which is why it's so popular for use in construction and marine projects.
  • 316/316L is non-magnetic in the annealed condition but can become slightly magnetic as a result of cold working or welding.
  • Most of the existing 316L in China market are produced according to American standards.
  • The keen resistance of 316L stainless steel to potable water and the alkalis and acids in food, make it ideal for use in restaurant kitchens.
  • Rupture and tensile strength at high temperatures


  • Food handling and processing equipment: Cookware, tablewares, milking machines, food storage tanks, coffee pots, etc.
  • Automotive exhaust system: Exhaust flexible pipes, Exhaust manifolds, etc.
  • Chemical processing, equipment
  • Rubber, plastics, pulp & paper machinery
  • Pollution control equipment
  • Heat exchanger tubes, ozone generator
  • Medical implants (including Pins, screws and implants)
  • Semiconductors

The selection of the type of stainless steel needs to consider the following points: Appearance requests, air corrosion and the cleaning ways to be adopted, and then take into account the requirements of cost, aesthetics standard, corrosion resistance, etc..

We invest in technology and process control, we pay attention to each detail to ensure first time right, which will give us a leading edge to serve our customers.

Additional Services


Coil slitting
Slitting stainless steel coils into smaller width strips

Material thickness: 0.03mm-3.0mm
Min/Max slit width: 10mm-1500mm
Slit width tolerance: ±0.2mm
With corrective leveling

Coil cutting to length

Coil cutting to length
Cutting coils into sheets on request length

Material thickness: 0.03mm-3.0mm
Min/Max cut length: 10mm-1500mm
Cut length tolerance: ±2mm

Surface treatment

Surface treatment
For the purpose of decoration usage

No.4, Hairline, Polishing treatment
Finished surface will be protect by PVC film

  • Previous:
  • Next:

  • Related Products